Entrepreneur Spirit 3

images17

Some people think becoming an entrepreneur is so difficult. They often think that to be an entrepreneur, money is the main factor. Actually, there is something else such as mental preparation that plays an important role.

Some people choose to be entrepreneurs because they do not want to suffer tight competition in the workforce, to have the desire for unlimited earnings, to have the freedom to determine their own destiny, and to be more independent or to have extra satisfaction on their personal achievement.

In the early stages of becoming entrepreneurs, however, people should realize that their income can be less than before, no more company allowances. Not mentioning that they have to work harder and longer hours, with the responsibility of employing their workers.

Moreover, they should cope with critics from their environment about how stupid they are for letting go such a good job with good payments and benefits.

People should have more than one income source, but by being entrepreneurs, they are working for themselves, and they alone will determine how much they want to earn and how.

Tips for new entrepreneurs:
Start with a low working capital, so people can minimize their potential loss that may occur.
The other advantage is to train to survive in the new business with minimum facilities.
Be flexible; entrepreneurs should revise their business concept with current trends and economical conditions.
It is recommended to have a mentor who can share knowledge and give advises on critical points.
Start with your hobbies.
By doing so, hopefully they can cope with the frustration and do not give up when they have to deal with difficulties.
Sometimes it is a good idea to do a completely new business idea that might bring less competitors.

Starting a new business needs capital. It is a safe way to use their own savings, because they do not have to pay interests or risk their assets when taking business loans from a local bank.

Avoiding interests should be considered since it is hard for a new business to gain profits during its first months of operation. It can take their breath away to pay high interests.

For people with a strong network, they can look for partners to cooperate with, so they also can share the capital.

Having a business does not mean that people will earn profits right away. Entrepreneurs should think about getting loyal customers and give them competitive services.

After a business has been developed, entrepreneurs might need employees. it is important to put honesty as the first criteria. It is a fact that honest people become rare nowadays, and you do not want to be cheated by your employees.

Last but not least, entrepreneurs should understand that running a business is a process. There will be some critical moments before they can earn a stable profit.

ComForcare Franchise Partners with NPDA to Provide Client-Centered Home Care Services

images14

Streamwood, IL, October, 2012 – ComForcare of Northwest Suburbs in Streamwood IL, is proud to announce they are a member of the National Private Duty Association (NPDA). The NPDA partners with private home care agencies, and companies that offer home care aides, companion care, homemaking assistance, and other supplemental elderly care services to offer trusted and reliable caregiver information.

-The NPDA was founded on the principles of providing high quality private duty home care, and we are pleased to support that cause,- says ComForcare owner, Bryan Ernst. -At ComForcare, our practices reflect their model to employ, train, and supervise caregivers and to create a unique care plan for each of our clients in order to offer a safe, healthy, and independent lifestyle for them in the comfort of their own home.-

As a member of NPDA, ComForcare commits to employ trained caregivers and assume all responsibility for the payroll and related tax information to protect the client and provide the highest level of care. NPDA members also stand together to with the opinion that people should be able to age safely in place at home to the extent possible according to their desires and permitted by their resources. They also champion measures at both federal and state levels to promote home care quality and affordability.

To accomplish these goals, ComForcare offers affordable part-time and full-time home care services for clients on an individual basis to meet their specific needs. As an industry leader, ComForcare has been recognized for its exceptional client-centered transition of care program and relationship-based home care services. ComForcare uses a rigorous 10-step hiring process to ensure all caregivers meet the highest professional, education, and experience requirements in order to provide trusted, reliable, and compassionate care.

About ComForcare Home Care ComForcare began in Bloomfield Hills, Michigan, in 1996 as a company dedicated to establishing a new standard in the quality of non-medical home care. After perfecting the winning formula, ComForcare began franchising. They are one of the fastest growing franchises in the country with more than 135 franchise owners who operate 150 territories throughout the United States and in Canada and the U.K. Each independently owned and operated ComForcare office offers elderly care services including personal care, homemaking, transportation, companionship and family respite services to improve the quality of life and level of independence for every individual and family receiving our services.

ComForcare Home Care 2510 Telegraph Road, Suite 100 Bloomfield Hills, MI 48302 248-745-9700

Come Knowledgeable Basic Bank Account No Credit Check Answers

images12

We’re maybe not really necessarily seeing a decrease in the wide variety of individuals at the branch,’ mentioned Everhart. ‘we all just completed a round of helping one customer add not tellers however banker mortgage persons in several of the branches over their footprint. The Charlotte location was included. They certainly sought to incorporate staff.’ Banks were putting, on average, three to five teller stations in every branch, she said. That’s down from as several as eight stations in the past, she said. Deposit Checks – This try a relatively hot feature that allows one to make a check deposit if an individual take a pic on the consult their smart-phone.

The potential effects of these types of a move could not be conveniently noticeable, however be confident they can be strong plus far-reaching. Since 2008 there has been almost no industry for room mortgages inside this country ‘ investors just refuse to buy all of them from financial institutions unless they have Fannie or Freddie seals of acceptance. In fact, almost every mortgage authored inside this nation because the meltdown features had to pass through 1 of those 2 businesses before information technology can be available to individuals in the available market.

Go to my web site BankAccountPro.com for other guides and articles on Swiss Bank Account Opening.

Come Knowledgeable Basic Bank Account No Credit Check Answers

But, yahoo, Twitter and Apple tend to be improbable to like to be banking institutions using the sort of capital, compliance plus regulatory overhead connected with all the financial company. However, Apple must probably see it’s own financial permit in the Caymans only to keep their particular large wad of cash supplies at the moment. I’m positive that would in some way render feeling. The greater likely result was really that Google, Twitter and Apple become element on the answer for reducing distribution outlay for banking companies, and they’ll probably end up being in a position to charge a superior for which gain access to in the future.

The cover of their internet financial membership is actually at danger from hackers. You’d require a desirable pc safety from problems and applications bundle used by next celebrations to shield yourself from any problems which could be performed to the net economic solutions account. Once they very first appeared found regarding the websites all online banking institutions, i.e. those which never have actually any walk inside divisions, had been developed solely for net treatments to right vie with conventional financial institutions. Much more helpful and cheaper to manage they have been joined up with online by usual high road banking companies attempting to discover their particular cut on the web banking dessert.

People Making Good Money, They Trade Bitcoins

images9

Traders make good money doing Bitcoin trading. Recently, Bitcoin was in negative news as one of the online companies that accepted Bitcoin was selling guns and drugs to people and the FBI arrested their owner. However, that does not mean that Bitcoin is over as the FBI still considers that Bitcoin is not illegal. In its charge against Silk Road, FBI claimed that Bitcoin is not illegal and there are not charges against it.

Bitcoin which is generated at a controlled rate using a computer program is becoming a popular trading option among traders. Also, being traded around the world these days for many traders consider it a beneficial tool to make profit like Forex, you can trade Bitcoin and profit from it. Additionally, as there is no governmental interference, you do not worry if it is under the whims and fancies of the governments or rulers.

How Can You Trade Bitcoins?

You need to first contact brokerage firms as there are several brokerage firms that help you trade Bitcoin. They help you make money investing in Bitcoin as most of these brokers are known for providing highly useful trading platform; you can trade without much hassle. Additionally, they help you trade bitcoins like you trade any other asset like currency paiies and help you make money.

Why is Bitcoin a Lucrative Asset?

In the last couple of years Bitcoin has become one of the most popular trading options for traders. This year in the beginning it went higher up, and was trading close to 250USD per Bitcoin; from this fact, you can understand how much potential it has for traders. Moreover, Bitcoins are safe and secure as these are a cryptographic digital currency, there is a lot of privacy and that is what attracts traders.

Additionally, as Bitcoins are generated at a controlled rate using a computer program, even you can make them and save them in your hard disc; however, that needs a lot of expertise and skills required for Bitcoin mining. Nonetheless, the best thing for you if you do not want to do Bitcoin mining is that you can purchase Bitcoins in one of two ways i.e. you get them either through an exchange platform, or directly through other people i.e. retailers.

These are often sold by retailers or traders who wish to make money buying them at lower prices and selling them at higher prices like any other currency or share. However, you need to be cautious about all this as there are chances of cheating. Nonetheless, whoever you buy your Bitcoin from, make sure that it is saved or protected as there are a lot of cases where they have been stolen.

Bank Of America Loan Modification — A Simple Five Steps To Approval!

images14

Have you been worried or even just concerned about meeting a high monthly mortgage payment? Perhaps you have been pondering negotiating for a better deal, such as a Bank of America loan modification period. This nationwide lending bank is now offering loan workarounds to some of its borrowers. You can improve your chances of getting the loan modification deal. If you meet certain approval requirements, you can lower your mortgage payment. Before you apply, you need to know about these Five Steps to Approval.

1.Study the Bank of America loan modification approval guidelines. To qualify for a loan workaround program, you must meet specific disposable income and debt to income ratios.

2.Collect all necessary documentation for the bank. A bank officer will review your documents to decide whether you qualify for a Bank of America loan modification. Be sure that you have everything before you apply, in order to avoid any possibility of delay or even denial of your application.

3.A Hardship Letter is an essential part of your document package. You must present convincing, compelling evidence that you have experienced or will suffer from a financial hardship due to your current mortgage payment. There are three essential elements in a Hardship Letter — be sure that you know what they are.

4.Take time to prepare, accurately and properly, the Bank of America loan modification application forms. Everything you state is subject to verification, and so you must include all important information, truthfully, to ensure that your loan workaround is given the maximum possible consideration for approval.

5.Be persistent. Eight weeks is not uncommon for processing time of your Bank of America loan modification application. So be patient as well! Even if you are declined the first time, do not give up. Many homeowners were able to get an initial rejection of their application overturned by being diligent, tenacious, focused, and persistent in their pursuit of an affordable mortgage. Your home is at stake, and a successful application allows you to keep your home.

By studying the guidelines; being diligent, complete and truthful in your application; and persisting in your qualification process, a Bank of America loan modification may well be yours. Take the time and invest the energy in doing the application properly, by understanding the bank’s approval guidelines. Ask any necessary questions for proper completion of the paperwork. Get the help you need and keep your home, as homeowners across the country continue to do. You too can do it!

Work Along With A Lawyer To Be Able To Determine Exactly What You Could Do Regarding Child Custody Accommodations

images4

Through a divorce case involving children, there is going to be a decision that needs to be made regarding which parent will have primary custody of the children, or perhaps if both dad and mom may share the primary custody. It is essential for a father or mother to contemplate working with a legal representative to be able to figure out these types of details and also in order to make certain they’ll get a fair amount of custody of their particular child. There is certainly the capability for both mother and father to have a reasonable share at the custody of the kid, but a person will need to make certain they really are aware about their own rights.

It is critical for a person to work together with a legal professional to locate effective solutions during divorce. They will want to ensure they’re going to understand their very own rights and also have the capability to fight for them. The lawyer currently understands precisely how the court system functions, precisely how they can get the help they will need, as well as exactly what they will be able to do in order to get the final result they will need. They’re going to have the ability to work directly with an individual in order to help them to make the right choices in order to have the opportunity of achieving their particular goals and also to improve their situation so the courts may agree that exactly what they need will likely be the appropriate choice.

It really is essential for an individual to actually discover as much as possible with regards to precisely how their actions will be viewed by the courts and concerning precisely how it might impact the feasible results of the divorce as well as custody of the children. In many instances, understanding residential custody will probably be critical, and that is something they’ll want to discuss together with a legal professional. Even though they may discover a large amount of info over the internet that may offer them basic details regarding it, they’ll need to speak together with a legal representative to find out more regarding precisely how it applies in their particular situation and also exactly how it might effect the outcome of their situation.

If perhaps you wish to understand a lot more, be sure to check out the posts at The Global Dispatch right now. You can obtain a lot of general details here so that you know much more concerning your rights and with regards to exactly how your actions may effect just how your circumstance concludes. You’ll want to read more at www.theglobaldispatch.com now and after that consult with a lawyer to make certain you will acquire the end result you’ll want from your separation and divorce.

Transition from Military Life to Small Business Careers

images7

Perhaps one of the most challenging career and employment situations imaginable takes place every single day when individuals serving in the military prepare to move from military service to a new career. This involves thousands of motivated government employees who at first glance should have absolutely no trouble in obtaining an appropriate job. It is hard to imagine any prospective employees who would have more motivation to work hard and succeed in whatever they do.

Despite initial appearances, military personnel are currently experiencing a high unemployment and underemployment rate. Perhaps because of this or outdated assumptions about the value of all forms of college education, the first step in military transition to business careers is often a decision to obtain a college degree. This can prove to be the right move in some cases, but it can also become an expensive mistake.

The difference between education and training is frequently misunderstood by many people, and such misunderstandings probably contribute to a disproportionate percentage of career choices focusing on educational institutions instead of more specialized (and much cheaper) career training programs. While advanced education has a special place for specific purposes and goals, it is simply not the best career choice in a surprising number of cases. One of the best possible illustrations of this dilemma occurs when someone is departing from the military. In this situation, education can appear to be the “easy” decision. But with more scrutiny, training frequently emerges as the “smart” decision.

Just as specialized business training is usually one of the most cost-effective strategies available to small businesses, the selection of a practical career training program will often prove to be a more cost-effective military transition alternative in comparison to other options that include lengthy and expensive university studies. It is true that the most viable and appropriate training choices will require some investigative time and effort to evaluate thoroughly. In large part this is due to the fact that colleges and universities have extensive marketing resources to advertise and persuade while the less well-known training opportunities are more of a “word of mouth” situation.

For example, one of the most effective career training situations devotes no resources whatsoever to advertising and lobbying. In this case the program leads to a small business finance consulting career. Because overhead is much less than the highly-capitalized universities, the cost of such services are understandably much less. Unfortunately it is not always true that you get what you pay for, so a prudent military transition will require due diligence from start to finish.

Stephen Bush has provided candid business advice to small business owners for over 30 years. He specializes in business negotiating and business proposal writing. Steve offers career training programs for small business finance consulting throughout the United States and Canada. He is a U.S. Navy veteran who works directly with individuals leaving military service and helps with the transition to a small business career.

Why seek employment law advice for your small business

images9

While it is perfectly normal for a business owner to want to focus on the most essential processes that contribute to the success and growth of its small business or startup, paying attention to the legal aspects of running a business is also very important. Statutory compliance, staff employment, terms of service and supplier contracts are the areas where professional legal advice services can help secure your business and save money in the long term.

According to a recent report published by the UK Legal Services Board, called In Need of Advice? and based on a YouGov survey of over 9000 British small businesses, 38% of surveyed small businesses experienced one or more legal problems in the past year, out of which employment law issues were second most common situations business owners had to face, right after issues concerning trading. While 45% of surveyed small business owners considered that legal problems have a tangible impact on their business operations and growth, in the majority of cases they dealt with problems entirely on their own (52%), with only 16% of legal problems being solved through professional legal services.

Prepare your small business for future employment law situations

As businesses grow, its almost inevitable that small business owners will have to deal with the occasional difficult employment scenario, the most common issues revolving around employee gross misconduct, unfair dismissal and redundancy. These employment issues can have a negative impact on the overall performance of the business and can quickly escalate and generate loss if the correct legal steps are not followed. This is why seeking employment law advice from the outset helps a small business be prepared to handle any employment situation correctly .

Employment law advice directly from the experts

It is good business practice to seek employment legal advice not only when employee grievances arise or legal action is required, but from the very beginning of your business setup.

Other than offering employment law advice and support in cases of gross misconduct, redundancy and dismissals, an employment law solicitor can play a preventive role, by helping small business owners set up the correct employment contracts, prepare employee handbooks and other essential employment procedures and keep the business up to date on employment legislation.

Affordable employment legal advice

There are many ways in which small businesses that cannot afford a dedicated HR and employment service can still benefit from expert employment legal advice. While engaging a high street employment firm of solicitors on matters requiring legal action in court can prove to be an expensive exercise, small business owners can seek employment law advice with local professional associations and groups, which offer a series of online legal advice resources that any small business can easily access. Another route to take is to engage independent accounting and tax consultants that often include employment solicitors and offer employment law advice and guidance on a retainer arrangement, which is usually the most cost-effective solution for small businesses.

Simplifying Effortless Gta Online Money Glitch Advice

images17

New ???GTA Online??? infinite money glitch found after ???GTA 5??? 1.08 update – National Video Game

Rockstar Games released a whole new patch for Grand Theft Auto 5 the other day which addressed some of the money and car duplication exploits seen gta online new money glitch in GTA Online. According to an investigation by CinemaBlend from Feb. 17, apparently GTA 5 patch 1.10 didn’t remove every one of the exploits from GTA Online as players are finding just one more car duplication and money glitch in GTA Online.

For these cheats, it is possible to enter the string of commands directly from gameplay, and you will use the directional pad when the code contains a directional command, to make sure you input it accurately. In fact, it’s recommended that you slide your fingers from D-pad command to another location, to make sure they’re together in a very smooth flow. You must enter in the code quickly, also, to make certain the overall game recognizes it as a code and never a coincidental list of button presses. If you might be having problems getting a code to work, just check it and ensure you might be entering it correctly. It will work. Keep in mind that cheats tend not to carry across gameplay sessions, when you quit your game and commence playing again, you will need to re-type in the codes to ensure that they’re active.

Down, Up, Up, Up, X, R2, R1, L2, L2 : Pedestrian Attack (can not be switched off). Rockstar Games released patch notes for GTA 5 patch 1. Rockstar Games provided a quick change join relation to its the recently-released 1. Without attacking him or defending yourself, discuss what are the problem really is. Implimintation of the cheats below help keep hair on your head, and you against becoming frustrated.

If you have been playing GTA Online and received a lot of GTA$, but didn’t perform in any game manipulation, Rockstar has disclosed those players are not punished. However, whenever they choose to, any gifted money is easy to remove from your account by submitting a request to Rockstar Support. Find the company’s full comment below:

gta 5 online money cheats includes a substantial purpose in Us Tradition. Some people is frequently seen participating in routines related to gta 5 online money hack ps3. It is partly simply because males and females on most age ranges might be concerned in addition to individuals are generally added jointly by simply that. Commonly anyone whom shows his or her detest with regard to gta 5 online money hack ps4 might be regarded as an incredible outcast.

Blown Film Extrusion Introduction

images8

Blown Film Extrusion Introduction
Blown film extrusion is a technology that is the most common method to make plastic films, especially for the packaging industry. The process involves extruding a tube of molten polymer through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene is used with this process, and other materials can be used as blends with these polymers. A diagram of a polyethylene chain is shown in Figure 1 to the right.
Background Theory on Polymers

In the cooling step of blown film extrusion, the amorphous, transparent melt crystallizes to form a translucent, hazy, or opaque film. The point where opacity begins in the bubble is known as the frost line. 
Fig 1: Model of polytheylene chain frompolyethylene Wikipedia article.The frost line height is controlled by several parameters: the air flow, film speed, and temperature difference between the film and the surroundings. Properties of the film, such as tensile strength, flexural strength, toughness, and optical properties, drastically change depending on the orientation of the molecules. As the transverse or hoop direction properties increase, the machine or longitudinal direction properties decrease. For instance, if all the molecules were aligned in the machine direction, it would be easy to tear the film in that direction, and very difficult in the transverse direction.

The Film Blowing machine Process

Fig 2: Schematic of set-up from User:J.Chiang.

Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common. Figure 2 shows a schematic of the set-up for blown film extrusion. This procedure consists of four main steps: The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous liquid. This molten plastic is then forced, or extruded, through an annular die. Air is injected through a hole in the center of the die, and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film. The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter. After solidification at the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated. Advantages Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220 C, where as the temperature of blown film is about 135 C. Furthermore, the cost of the equipment is approximately 50% of a cast line.

Blown Film Extrusion Disadvantages Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of chill rolls or water, which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including transparency, haze, and gloss.

Common Problems Air entrapment between film layers and rollers – this may cause film scratching or wrinkling, or processing problems when winding up the film due to reduced friction. Possible solutions to this is using a vacuum to remove entrapped air or by using winding rolls with a diamond shaped groove in the rubber cover to increase surface area and decrease amount of entrapped air in the film. Large output fluctuations from the die – this causes thickness variations, and can be prevented by keeping the extruder clean and by using more consistently shaped pellets in the extruder. Melt fractures – these appear as roughness or wavy lines on the film surface, and can be eliminated by lowering the viscosity of the polymer melt. This can be done by increasing the melting temperature or by adding an internal lubricant to the material composition. Thickness variations in the film – this can be avoided by centering the die in the extrusion line before every run, adjusting the air speed of the cooling system, or by using heated die lips. Die lines on the surface of the film – this defect reduces the aesthetic appeal of the film, reduces optical properties, and weakens mechanical properties such as tear strength. This can usually be avoided by routinely cleaning the inner surfaces of the die and by refinishing scratched or roughened flow surfaces. Gels – these defects are small, hard globules encapsulated in the film or stuck on the film surface and reduce the aesthetic appeal of the film and cause stress concentration points which may result in premature failure. These are caused by overheating to the point of polymer degradation in the die, and can therefore be avoided by cleaning the inner surfaces of the die on a regular basis. Optimization of the Process Coextrusion One way to improve the line efficiency of blown film extrusion is to implement coextrusion. This is the process of extruding two or more materials simultaneously through a single die. The orifices in the die are arranged such that the layers merge together before cooling. This process saves time because it extrudes two or more layers at the same time, and it provides a method with fewer steps to produce multilayer films. The production rate for a coextruded multilayer film of three layers is about 65m/min, and the production rate for a single layer of blown film is about 130m/min. Thus, in order to produce 10 000m of a three layer multilayer film, it would take almost 4 hours using a single layer blown film process, and only 2 and a half hours using the coextrusion process. Furthermore, the film produced from the single layer process would require an extra step to glue the layers together using some sort of adhesive. Coextrusion is the least expensive means of producing layered films and the coextrusion system is capable of quick changeovers to minimize production line down time.

Minimizing the Melt Temperature
The efficiency of blown film extrusion can be improved by minimizing the temperature of the polymer melt. Reduction of the melt temperature causes the melt to require less heating in the extruder. Normal extrusion conditions have a melting temperature at about 190 C despite the fact that the temperature of the melt only needs to be about 135 C. However, it is not always practical to decrease the melting temperature by that much. By decreasing the melt temperature 2 to 20 C, the motor load can be decreased by about 1 to 10%. Furthermore, reduction of the melt temperature causes less need for cooling, so there is a reduced use of the cooling system. Moreover, removing heat from the bubble is usually the rate-limiting factor in this extrusion process, so by having less heat in the polymer to remove, the rate of the process can be increased, thus yielding higher productivity. A way to maintain the melt temperature at a minimum is to choose an extruder that is matched to the specific processing conditions, such as the material of the melt, pressure, and throughput.

Heated Extrusion Die Lips
Typically, solutions to melt fractures involve decreasing the output or increasing the melt temperature to decrease the shear stress in the extruder. Both of these methods are not ideal because they both reduce the efficiency of the blown film line. Heated extrusion die lips can solve this problem. This targeted heating method allows for film extruders to be run at higher production rates with narrower die gaps while eliminating melt fractures. Direct heat is applied to the surface of the polymer melt as it exits the die so that viscosity is reduced. Therefore, melt fractures, which are caused when trying to extrude too much of the polymer at one time, will no longer act as a limiting factor to increasing the production rate. Furthermore, heated die lips use less energy than increasing the melting temperature because only the surface of the melt is heated and not the bulk of the liquid. Another benefit of using heated die lips is that thickness variations can be controlled by adding heat to certain areas along the die circumference to make the film at that position thinner. This would ensure that no excess material is used.
Determine how much energy each of these processes can save per given volume of material. 

Above article from www.appropedia.org

Kingdom Machine Co.,ltd Ruian Economic Zone,Wenzhou,China 325200
Mobile:0086-13958812663;  0086-13088651008
Tel.:0086-577-65127709       Fax:0086-577-56846789 Whatsapp:0086-13958812663
sale@kingdommachine.com www.kingdommachine.com www.chinablownfilmextrusion.com